Face Lit (Vis-non)
With this new technique, we succeeded in making LED metal channel letter without side screws, which were previously required to fix the acrylic face. With Vis-non, there are no more side screws to spoil the look when viewing from below!
*For safety, there is a hidden retaining screw on the top of the letter.
Light Source | LED Module / LED Custom Unit |
---|---|
Material | Acrylic / Stainless Steel or Steel Channel *Steel is indoor use only. |
Size | Recommended: 250-400mm Available: 200-450mm |
Thickness | LED Module: 70mm~ | LED Custom Unit: 40mm~ |
Minimum Stroke Width | LED Module: 20mm~ | LED Custom Unit: 15mm~ |
Face Lit (Frameless)
Daikan's original Lumi Channel is low-profile and does not require acrylic-holding trims. With bright and uniform illumination, this sign provides faithful expression of a logotype which makes it one of designers' favorites. (PAT.P.)
Light Source | LED Module / LED Custom Unit |
---|---|
Material | Acrylic / Stainless Steel or Steel Channel *Steel is indoor use only. |
Size | Recommended: 300-600mm Available: 200-900mm |
Thickness | LED Module: 70mm~ | LED Custom Unit: 40mm~ |
Minimum Stroke Width | LED Module: 20mm~ | LED Custom Unit: 15mm~ |
Face Lit (Trim Cap Face)
This standard-type LED channel is suitable for medium and large-sized signs. The 304-type stainless steel made frame makes it robust and rust-proof with excellent weatherability qualities.
Light Source | LED Module / LED Custom Unit |
---|---|
Material | Acrylic / Stainless Steel with trim cap or Steel with trim cap *Steel is indoor use only. |
Size | Recommended: 300-1000mm Available: 200-1500mm |
Thickness | LED Module: 70mm~ | LED Custom Unit: 40mm~ |
Minimum Stroke Width | LED Module: 20mm~ | LED Custom Unit: 15mm~ |
Minimum Stroke Width of trim cap | 5mm~ *Trim Cap Width is attached from the basic logo to the outside. |
Partial Side Lit
Partial side lit type has been added to LED Channel series. It creates fine backlight effect even without off-wall installation, which can effectively avoid reflected LED spots on glossy wall surfaces.
Light Source | LED Module / LED Custom Unit |
---|---|
Material | Stainless Steel or Steel Channel / Acrylic *Steel is indoor use only. |
Size | Recommended: 300-800mm Available: 200-1000mm |
Thickness | LED Module: 60mm~ | LED Custom Unit: 30mm~ |
Minimum Stroke Width | LED Module: 20mm~ | LED Custom Unit: 15mm~ |
Back Lit
With LED light source in stainless steel channel, the Daikan quality of this sign makes it perfectly suitable for eye-level installation.
Light Source | LED Module / LED Custom Unit |
---|---|
Material | Stainless Steel or Steel Channel *Steel is indoor use only. |
Size | Recommended: 300-1000mm Available: 200-1500mm |
Thickness | LED Module: 40mm~ | LED Custom Unit: 25mm~ |
Minimum Stroke Width | LED Module: 20mm~ | LED Custom Unit: 15mm~ |
Face and Back Lit (Trim Cap Face)
This model is a both front and back lit LED Metal Channel type. This is an ultimate LED sign that allows you to recognize letters clearly by emitting light on the front side, and also gives you a sense of floating by emitting light on the back side.
Light Source | LED Module / LED Custom Unit |
---|---|
Material | Acrylic / Stainless Steel with trim cap or Steel with trim cap *Steel is indoor use only. |
Size | Recommended: 300-1000mm Available: 200-1500mm |
Thickness | LED Module: 100mm~ | LED Custom Unit: 60mm~ |
Minimum Stroke Width | LED Module: 20mm~ | LED Custom Unit: 15mm~ |
Minimum Stroke Width of trim cap | 5mm~ *Trim Cap Width is attached from the basic logo to the outside. |
*The designated AC/DC power supply to be used. Please refer to details.
*UL and CE are limited to LED Custom Unit Type.
*The type of LED Module used depends on the place of installation and sign specifications. Inquiries for suitable type are welcome.
*Drain holes 8mm in diameter to be opened on the sign bottom for outdoor use.
▲See "Warranty Policy" before placing order.
▲Film and inkjet parts are not covered under the warranty.
▲Product specification and appearance may be subject to change without notice due to product improvement.
▲Some letters cannot be manufactured depending on the font type. Please send your logo data in Adobe Illustrator format to us, and we will provide an accurate quotation.