Face Lit (Bevel Cut / Straight Cut)
Standard model of Lumi Letter with special luminance resin illuminated by embedded LED. It offers broad design possibilities with 16 LED color variations. Please specify desired paint color for the sides.
| Light Source | SMD-LED on Custom Designed Circuit Board |
|---|---|
| Material, Thickness |
Luminance Resin 15,20,30mm Thick Custom Painted Sides Back Panel: ABS Resin 2mm Thick *15mm thick is available only for a stroke of less than 10mm. |
| Size | Bevel Cut Recommended: 70-450mm Available: 30-900mm |
| Straight Cut Recommended: 100-450mm Available: 100-900mm |
|
| Minimum Stroke Width of Luminance Layer |
Bevel Cut 1mm *It varies depending on thickness and cutting method *Please contact us for a stroke of less than 1mm. |
| Straight Cut 8mm (6.5mm for Slim Type) |
Face and Side Lit (Bevel Cut / Straight Cut)
Lumi Letter with two-tone illumination effect. With transparent vinyl sheet, it maintains the same visual image whether LED light is on or off.
| Light Source | SMD-LED on Custom Designed Circuit Board |
|---|---|
| Material, Thickness |
Colored Translucent Film (Optional) / Special Luminance Resin 15mm Thick / Acrylic 8mmThick |
| Size | Bevel Cut Recommended: 70-450mm Available: 30-900mm |
| Straight Cut Recommended: 100-450mm Available: 100-900mm |
|
| Minimum Stroke Width |
Bevel Cut Recommended: 10mm Available: 1mm *Light spots will be visible *It varies depending on thickness and cutting method |
| Straight Cut Recommended: 18mm Available: 9.5mm *Light spots will be visible |
Face and Side Lit Round Edge
Round edged Lumi Letter illuminates 180 degree overall viewing angle. The round form provides gentle and beautiful light.
| Light Source | SMD-LED on Custom Designed Circuit Board |
|---|---|
| Material, Thickness |
Special Luminance Resin 15,20mm Thick / Acrylic 8mm Thick |
| Size | Recommended: 100-450mm Available: 100-900mm |
| Minimum Stroke Width of Luminance Layer |
Recommended: 18mm Available: 9mm |
Face and Side Lit Round Edge Layered Type
This round-edged Lumi Letter exhibits elegant illumination style. Multiple variations of Taff Lite Sign and D-Letter top layers allow creating its unique design.
| Light Source | SMD-LED on Custom Designed Circuit Board |
|---|---|
| Material, Thickness |
Taff Lite or D-Letter 2mm Thick / Special Luminance Resin 15,20mm Thick / ABS resin 2mm Thick |
| Size | Recommended: 100-450mm Available: 70-900mm *As for Taff Lite, the largest size varies by its finishing |
| Minimum Stroke Width of Luminance Layer |
Recommended: 24mm Available: 8mm *Light spots will be visible |
Face and Partial Side Lit (Bevel Cut / Straight Cut)
Double-illuminated Lumi Letter. With its Partial Side Lit system creating fine backlight effect, this sign is applicable on glossy installation surfaces as it does not require off-wall mounting and prevents appearance of LED light spots on the wall.
| Light Source | SMD-LED on Custom Designed Circuit Board |
|---|---|
| Material, Thickness |
Special Luminance Resin 20mm Thick / Special Acrylic 5mm Thick |
| Size | Bevel Cut Recommended: 70-450mm Available: 30-900mm |
| Straight Cut Recommended: 100-450mm Available: 100-900mm |
|
| Minimum Stroke Width of Luminance Layer |
Bevel Cut 1mm *It varies depending on thickness and cutting method *Please contact us for a stroke of less than 1mm. |
| Straight Cut 8mm |
Side Lit Type-A (Bevel Cut / Straight Cut)
Wide selection of Taff Lite Sign and D-Letter finishing styles for Lumi Letter top layer provide infinite visual variations, reflecting distinct quality of Daikan brand. It also creates a nice halo effect without LED spots on any installation surface.
| Light Source | SMD-LED on Custom Designed Circuit Board |
|---|---|
| Material, Thickness |
Taff Lite or D-Letter 5mm Thick (Recommended) / Special Luminance Resin 15,20mm Thick |
| Size | Recommended: 100-450mm Available: 100-900mm *As for Taff Lite, the largest size varies by its finishing |
| Minimum Stroke Width | Recommended: 24mm Available: 8mm *Light spots will be visible |
Side Lit Type-B (Bevel Cut / Straight Cut)
We have released a long-awaited side lit type of Lumi Letter!! Beveled side lighting has high visibility and enhances the effect of delicate logo designs.
| Light Source | SMD-LED on Custom Designed Circuit Board |
|---|---|
| Material, Thickness |
Taff Lite or D-Letter 2mm Thick (Recommended) / Special Luminance Resin 15,20mm Thick/ Acrylic 8mm Thick |
| Size | Bevel Cut Recommended: 70-450mm Available: 30-900mm *As for Taff Lite, the largest size varies by its finishing |
| Straight Cut Recommended: 100-450mm Available: 100-900mm *As for Taff Lite, the largest size varies by its finishing |
|
| Minimum Stroke Width | Bevel Cut Recommended: 10mm Available: 1mm *Light spots will be visible *It varies depending on thickness and cutting method |
| Straight Cut Recommended: 18mm Available: 9mm *Light spots will be visible |
Partial Side Lit (Bevel Cut / Straight Cut)
With the slim outline of the side lit back plate, it creates fine backlight effect even without off-wall installation, which can effectively avoid reflected LED spots on glossy wall surfaces.
| Light Source | SMD-LED on Custom Designed Circuit Board |
|---|---|
| Material, Thickness |
Taff Lite, D-Letter, or Acrylic 8,10,15,20mm Thick / Opal Acrylic 5mm Thick |
| Size | Bevel Cut Recommended: 70-300mm Available: 70-900mm *As for Taff Lite, the largest size varies by its finishing |
| Straight Cut Recommended: 100-300mm Available: 100-900mm |
|
| Minimum Stroke Width | Bevel Cut 1mm *It varies depending on thickness and cutting method |
| Straight Cut 8mm |
Side and Back Lit
Designed in combination with Taff Lite Sign and D-Letter , this superior quality sign creates vivid visual image. Even brighter backlight effect is achieved with off-wall installation.
| Light Source | SMD-LED on Custom Designed Circuit Board |
|---|---|
| Material, Thickness |
Taff Lite or D-Letter 5mm Thick (Recommended) / Special Luminance Resin 15,20mm Thick |
| Size | Recommended: 100-450mm Available: 100-900mm *As for Taff Lite, the largest size varies by its finishing |
| Minimum Stroke Width | Recommended: 24mm Available: 8mm *Light spots will be visible |
Back and Partial Side Lit (Bevel Cut / Straight Cut)
Off-wall installation of the partial side lit type achieves beautiful backlight effect while providing a fine illuminated outline.
| Light Source | SMD-LED on Custom Designed Circuit Board |
|---|---|
| Material, Thickness |
Taff Lite, D-Letter, or Acrylic 8,10,15,20mm Thick / Opal Acrylic 5mm Thick |
| Size | Bevel Cut Recommended: 70-300mm Available: 70-900mm *As for Taff Lite, the largest size varies by its finishing |
| Straight Cut Recommended: 100-300mm Available: 100-900mm |
|
| Minimum Stroke Width | Bevel Cut 1mm *It varies depending on thickness and cutting method |
| Straight Cut 8mm |
Back Lit Type-A (Straight Cut)
Enhanced with Taff Lite Sign and D-Letter layers on the top, this originally designed Lumi Letter demonstrates fine illumination and exquisite visual image which could not be achieved with the metal channel letter.
| Light Source | SMD-LED on Custom Designed Circuit Board |
|---|---|
| Material, Thickness |
Taff Lite or D-Letter 5mm Thick (Recommended) / Special Luminance Resin 15,20,30mm Thick |
| Size | Recommended: 100-450mm Available: 100-900mm *As for Taff Lite, the largest size varies by its finishing |
| Minimum Stroke Width | 8mm |
Back Lit Type-B (Bevel Cut / Straight Cut)
Enhanced with Taff Lite Sign and D-Letter layers on the top, this originally designed Lumi Letter demonstrates fine illumination and exquisite visual image which could not be achieved with the metal channel letter.
| Light Source | SMD-LED on Custom Designed Circuit Board |
|---|---|
| Material, Thickness |
Taff Lite, D-Letter, or Acrylic 10,15,20,30mm Thick |
| Size | Bevel Cut Recommended: 100-300mm Available: 70-900mm *As for Taff Lite, the largest size varies by its finishing |
| Straight Cut Recommended: 100-300mm Available: 100-900mm |
|
| Minimum Stroke Width | Bevel Cut 2mm *It varies depending on thickness and cutting method |
| Straight Cut 9mm |
*The designated AC/DC power supply to be used. Please click here for details.
*Please specify the paint color by the color code of RAL, Pantone or Benjamin Moore, etc.
*LED light spots will appear if stroke width is narrower than recommended dimension.
▲See "Warranty Policy" before placing order.
▲Product specification and appearance may be subject to change without notice due to product improvement.
▲Some letters cannot be manufactured depending on the font type. Please send your logo data in Adobe Illustrator format to us, and we will provide an accurate quotation.
![Installation Instructions[movie]](images/information/bm04.jpg)
