On the side, there is a hole for unlocking the safety lock. Push and shift the plate up while inserting the key. Then the frame can be taken off.
※Each product will be included with one unlock key.
・The slimmest illuminated signage in the industry.
・Outstanding brightness with average illuminance above 5000LX.
・Locking mechanism for easy change of display content
and protection against vandalism.
・Adjustable size（Minimum: 75×150mm~Maximum: 425×600mm）
※Certain sizes may not be achieved due to restrictions of the light source (LED circuit board). Please contact us for further information.
※Maximum size differs if the frame has to be non-removable. Please contact us for further information.
Safety Lock
Lumi Light Panel "SLIM" is built with a locking mechanism for prevention of careless openings and protection against vandalism.
After changing the display content, insert the frame. The magnet will help fixing the frame back to its original position and then it is locked.
2 Types of Plates to Choose From
Slim shop sign can be done by simply adhering inkjet sheet or cutout vinyl letters to the display plate. It is also recommended for information sign within commercial facilities.
It is convenient to insert graphic film (for illuminated signboard) between the cover and middle plate. This product is recommended for information sign which needs regular change of display content.
Changeable Orientation
The orientation of Lumi Light Panel "SLIM" can be changed to fit the location or graphics. ※Do not put the safety lock at the bottom.
Installation Method
Stud bolts are used for installing Lumi Light Panel "SLIM"
Although the orientation of Lumi Light Panel "SLIM" can be changed, the location of removable frame is fixed.
※The location of removable frame can be changed by special order, but requests may not be fulfilled due to restrictions of LED light source. Please contact us for further information.
During installation, please make sure that there is sufficient clearance - with area larger than the panel . on the left, right and top of the signage. Please note that if the clearance is not sufficient, exchange of plates will be impossible.
M4 stud bolts are used for installation of this product. Please carefully read the installation manual, which comes together with the installation template, and follow the instructions to ensure safe installation work.
