Lumi Letter mini｜LED sign(Letters) | Products |Total Sign Manufacturer DAIKAN

Face Lit

Lumi Letter mini responds to the needs of narrow stroke logo design. With bevel cut, it provides splendid illumination for letters with stroke width as narrow as 1mm and height as small as 30mm.

Light Source	SMD-LED on Custom Designed Circuit Board (*1)
Material	20mm Thick Special Luminance Resin w/Bevel Cut and Custom Painted Sides (*2)
Minimum Height	30mm (Recommended Size: 70mm) (Minimum Stroke of Face: 1mm)
Maximum Height	900mm (Recommended Size: 300mm)
Minimum Stroke	9.5mm (Quick Release System: 15mm)

Lumi Letter mini (Face lit)

Face and Partial Side Lit

Double-illuminated Lumi Letter mini. With its Partial Side Lit system creating fine backlight effect, this sign is applicable on glossy installation surfaces as it does not require off-wall mounting and prevents appearance of LED light spots on the wall.

Light Source	SMD-LED on Custom Designed Circuit Board (*1)
Material	20mm Thick Special Luminance Resin w/Bevel Cut and Custom Painted Sides (*2) / Special Acrylic
Minimum Height	30mm (Recommended Size: 70mm) (Minimum Stroke of Face: 1mm)
Maximum Height	900mm (Recommended Size: 300mm)
Minimum Stroke	9.5mm (Quick Release System: 15mm)

Lumi Letter mini (Face and Partial Side Lit)

Side Lit

We have released a long-awaited side lit type of Lumi Letter mini!! Beveled side lighting has high visibility and enhances the effect of delicate logo designs.

Light Source	SMD-LED on Custom Designed Circuit Board
Material	3mm Thick Taff Lite Sign or D-Letter / 15, 20mm Thick Special Luminance Resin
Minimum Height	70mm (Recommended Size: 100mm)
Maximum Height	900mm (Recommended Size: 450mm ※Maximum size of Taff Lite Sign varies with plating type.
Minimum Stroke	Recommended Size: 18mm (Minimum Stroke: 9.5mm Bright spots will be visible)(3)

Lumi Letter mini (Side Lit)

Partial Side Lit / Back and Partial Side Lit

This Lumi Letter mini responds to the needs of narrow stroke logo design but can be fabricated for both ultra-thin and solid letter types. Splendid backlight effect is achieved, whether installed on-wall or off-wall.

Light Source	SMD-LED on Custom Designed Circuit Board (*1)
Material	8.0, 10mm Thick Taff Lite Sign or 8.0, 10, 15, 20mm Thick D-Letter / Special Acrylic
Minimum Height	70mm Taff Lite Sign Layered Type / Recommended Size: 100mm D-Letter Layered Type / Recommended Size: 100mm
Maximum Height	600mm Taff Lite Sign Layered Type / Recommended Size: 300mm D-Letter Layered Type / Recommended Size: 450mm *Maximum size of Taff Lite Sign varies with plating type.
Minimum Stroke	10.5mm (Quick Release System: 15mm)

Lumi Letter mini (Partial Side Lit)

*1 The designated AC/DC power supply to be used. Please refer to details.

*2 To choose paint color for the sides, refer to DAIKAN Standard Colors or Pantone, RAL etc.

*3 LED light spots will appear if stroke width is narrower than recommended dimension.

▲See "Warranty Policy" before placing order.

▲Product specification and appearance may be subject to change without notice due to product improvement.

▲Some letters cannot be manufactured depending on the font type. Please send your logo data in Adobe Illustrator format to us, and we will provide an accurate quotation.