Semi-Straight Cut (6°, 8°)
The Semi-Straight Cut, a nearly right-angled bevel of 6° or 8°, is our standard cutting style, and enables us to manufacture signs containing delicately designed logos and designated typefaces.
Thickness | 2t・3t・5t・8t・10t・15t・20t・30t |
---|
*Standard Bevel Angle of Semi-Straight is 8°. Please specify if you need 6° angle.
*Dimensions of the letter bottom vary depending on the thickness and bevel angle of the letter. Please contact us for further information.
*Some letters may not be manufactured due to the size or font. Please contact us for further information.
Bevel Cut (15°, 30°, 45°)
Beveled finish gives volume and presence to your signs. For design containing very small or intricate parts, Bevel Cut provides lower cost and easier installation by connecting them into one piece.
Thickness | 2, 3, 5, 8, 10, 15, 20mm |
---|
*Dimensions of the letter bottom vary depending on the thickness and bevel angle of the letter. Please contact us for further information.
*Some letters may not be manufactured due to the size or font. Please contact us for further information.
R-Direct Cut
Softly rounded edge of R-Direct Cut makes it especially suitable for sans-serif typeface such as Helvetica. By adjusting the stroke width and thickness, it is possible to create a solid shaped sign similar to Arched Top at a reasonable price.
Thickness | 2, 3, 5, 8, 10, 15, 20mm |
---|
*Dimensions of the letter bottom to be the same as the provided artwork. Please contact us for further information.
*Some letters may not be manufactured due to the size or font. Please contact us for further information.
Chamfered+Semi-Straight Cut
Chamfered finish on edges gives sharp look, creates shiny appearance varying from different viewing angles with eye-catching effect. Multiple chamfered edge dimensions are available for letters of different font and size.
Thickness | 3, 5, 8, 10, 15, 20, 30mm |
---|
*When providing logo artwork, please inquire about the chamfered edge dimension.
*Standard 8° Semi-Straight Cut is applied to the bottom edge.
*Some letters may not be manufactured due to the size or font. Please contact us for further information.
Round+Semi-Straight Cut
Round+Semi-Straight Cut delivers a graceful profile with moderate curved lines that elegantly accentuates the look of your signs. Multiple round edge dimensions are available to fit desired letter stroke sizes, creating resplendent signs that demand attention.
Thickness | 3, 5, 8, 10, 15, 20, 30mm |
---|
*Standard 8° Semi-Straight Cut is applied to the bottom edge.
*Dimensions of the letter bottom vary depending on the thickness and bevel angle of the letter. Please contact us for further information.
*Some letters may not be manufactured due to the size or font. Please contact us for further information.
Arched Top
This distinctive and refined Arched Top is the result of mastered polishing hand work carried out by our highly skilled craftsmen. The Arched Top not only gives the beautiful look to sign letters but is also suitable for all front types.
Thickness | 3, 5, 8, 10, 15, 20, 30mm |
---|
*Arched shape varies depending on the front type or size. Dimensions of the letter bottom to be slightly larger than provided artwork as Semi-Straight Cut is added to initial dimensions.
*Some letters may not be manufactured due to the size or font. Please contact us for further information.
Prismatic Cut
Prismatic Cut, contour cuts letters and figures in a mountainous shape with uniform thickness. Performed with 3D Engraving with 3D carving data, this cut offers a more prominant and luxurious three-dimensional impression when compared to flat surface letters.
Thickness | 5, 8, 10, 15, 20, 30mm |
---|
*Straight Cut is applied to the bottom edge.
*Some letters may not be manufactured due to the size or font. Please contact us for further information.
Semi-Prismatic Cut
Semi-Prismatic Cut contour cuts letters and figures into a mountain shape. Unlike Prismatic Cut, this cut does not require the creation of 3D carving data, making it a more reasonably priced alternative while maintaining a high-grade luxurious expression. Please note that for logo artwork with non-uniform stroke widths, the thickness of letters will vary depending on stroke widths.
Thickness | 5, 8, 10, 15, 20mm |
---|
*Standard 8° Semi-Straight Cut is applied to the bottom edge.
*Dimensions of the letter bottom vary depending on the thickness and bevel angle of that letter. Please contact us for details.
*Some letters may not be manufactured due to the size or font. Please contact us for further information.
TUBE
With a cut shape inspired by neon tube circular bar bending, these impressive cut-out letters are designed to become brand symbols for stores and facilities. The glossy finish gives it a pop image, while a black matte finish creates a tasteful ironwork-like feel.
Type of Stroke Width | 8, 12, 15, 18mm dia. |
---|